Whole House Audio-Video, Intercom, Surveillance and Lighting Automation
Probably the best place to get started is with a description of some of the things that should you expect from a modern, all over the house system: the electronic heart of the luxury home is now the low-voltage panel – a centralized system in the wall (usually formed from steel), the “home runs” for most TV, telephone and network cabling for the building houses. “Home run” If I say, this means that each group of lines that starts in one place and the fans out there – the preferred method of cabling compared to today’s standards (although does not need any cables at home to run …). With the wiring terminals is also the distributor for any other type of signal: RG6 cable for TV-RF devices are end-separator and / or amplifier, telephone cabling (usually CAT5) will converge in a variety of blocks of telephone Ethernet cabling and go (CAT5 or CAT5e new), a network switch or hub (in combination with the router or gateway). Read the rest of this entry »
Applications of a Voice Activated TV Remote Control
How does a voice command remote control? The relay device remotely voice instructions to your Windows Home Media Center via a microphone and sometimes wireless as a “digital audio connection. This means that you are near the remote control to record your voice. Some voice commands activated TV remote control required that You tilt the remote in an angle in the hand, but they better use of advanced positioning technology with intelligent filters to determine if you express an order and when you talk with people in the room. Some basic commands used frequently will include: “Play”, “Stop”, “record” “jump” and.
The essential characteristics of a great voice activated TV remote control:
Media recognition of my name. (For example selecting from a series of the season you want to view and follow-up number) Read the rest of this entry »
Getting Hands on Control of Your Modern Home Studio
Control surfaces are a marvel of DAW technology. These devices act as the physical liaison between the features of a digital mixer, and the tools of your DAW software. They are not an essential piece of gear, meaning they are not “required” to use the features of your DAW software, rather they are an extension of physical control and offer the convenience of not having to rely on your mouse and cursor to control the functions of your software.
Having hands on control of compatible DAW software is a novel idea that uses modern technology to combine the assets of DAW software with the satisfaction of hardware.
- Do they do this?
- Do they do it well?
- Are they practical?
The control surface is a relatively new addition to the home and pro studio gear line-up, and has been creatively developed to be an affordable luxury available for hobbyists, yet intuitive enough to supplement professional studios. In fact many professional recording studios are using large control surfaces in place of a massive analog mixing console.
Control surfaces look and act in a similar manner to that of a digital mixer. Their are however, some distinct differences in how these two devices function.
Digital Mixers:
Digital mixers mix digital audio from within an external mixing board.
A digital mixer does its mixing onboard, using its own effects, and can output the mix to hard-disk or recorder for mix-down and mastering.
Control Surfaces: Read the rest of this entry »